Theoretical Analysis of Three Methods for Calculating Thermal Insulation of Clothing from Thermal Manikin

Skip Navigation
Jianhua Huang*

College of Textiles, Wuhan Textile University, Wuhan, Hubei 430073, China?* Tel. +86-27-59367572; fax 0086-27-87450870; e-mail: huang2010{at}wtu.edu.cn Received April 29, 2011. Accepted November 25, 2011. There are three methods for calculating thermal insulation of clothing measured with a thermal manikin, i.e. the global method, the serial method, and the parallel method. Under the condition of homogeneous clothing insulation, these three methods yield the same insulation values. If the local heat flux is uniform over the manikin body, the global and serial methods provide the same insulation value. In most cases, the serial method gives a higher insulation value than the global method. There is a possibility that the insulation value from the serial method is lower than the value from the global method. The serial method always gives higher insulation value than the parallel method. The insulation value from the parallel method is higher or lower than the value from the global method, depending on the relationship between the heat loss distribution and the surface temperatures. Under the circumstance of uniform surface temperature distribution over the manikin body, the global and parallel methods give the same insulation value. If the constant surface temperature mode is used in the manikin test, the parallel method can be used to calculate the thermal insulation of clothing. If the constant heat flux mode is used in the manikin test, the serial method can be used to calculate the thermal insulation of clothing. The global method should be used for calculating thermal insulation of clothing for all manikin control modes, especially for thermal comfort regulation mode. The global method should be chosen by clothing manufacturers for labelling their products. The serial and parallel methods provide more information with respect to the different parts of clothing.

© The Author 2011. Published by Oxford University Press on behalf of the British Occupational Hygiene SocietyThis ArticleAnn Occup Hyg (2012) 56 (6): 728-735. doi: 10.1093/annhyg/mer118 Current Issue
Disclaimer: Please note that abstracts for content published before 1996 were created through digital scanning and may therefore not exactly replicate the text of the original print issues. All efforts have been made to ensure accuracy, but the Publisher will not be held responsible for any remaining inaccuracies. If you require any further clarification, please contact our Customer Services Department.

View the original article here

Posted in: Analysis, Calculating, Clothing, Insulation, Manikin, Methods, Theoretical, Thermal, Three